SGC12BS surface mount schottky rectifie r reverse voltage 100v forward current 12a www.goodark.com 1/4 2014.03-rev.a features ? schottky barrier diodes ? low forward voltage drop ? low leakage current sgc (to 277) ? moisture sensitivity: level 1, per j-std-020 ? solder dip 260 c, 10 s ? low profile - typical height of 1.1 mm ? heatsink design ? high temperature soldering guaranteed: 260/10 seconds ? halogen-free according to iec 61249-2-21 definition anode ? 1 anode ? 2 cathode & ? heatsink e sgc (to \ 277) typical applications for low voltage high frequency inverters, dc/dc converters and polarity protection application. maximum ratings (ta = 25 c unless otherwise noted) vrrm v vrms v vdc v if(av) 1) if(av) 2) parameter symbol SGC12BS unit maximum repetitive peak reverse voltage 100 maximum rms voltage 70 maximum dc blocking voltage 100 maximum average forward rectified current 5.0 a 12.0 peak forward surge curren t83ms single ifsm a tj, tstg c peak forward surge current 8 . 3 ms single half sine-wave superimposed on rated load 240 operating junction and storage temperature range -55 to +150 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit i f =5a i f =12a i f =5a i f =12a ua ma ua volts 0.57 0.70 t a =125 0.39 - 0.53 0.65 maximum dc reverse current at rated dc blocking voltage vr=80v t a =25 i r 14.9 - t a =125 maximum instantaneous forward voltage t a =25 v f 0.47 - 9.6 - vr=100v t a =25 i r 29.5 250 ma c j nf r ja 1) /w r jm 2) /w notes,1)thermal resistance r ja is junction to ambient. free air,mounted on p.c.b with recommen ded copper pad area,2 oz,fr4 2)thermal resistance r jm is junction to mount.mounted on p.c.b with 30*30mm copper pad area vr=100v $ i r t a =125 15.2 30 typical junction capacitance 4.0 v, 1 mhz 1.35 typical thermal resistance juntion to ambient 75 juntion to mount 1 www.goodark.com 1/4 2014.03-rev.a
SGC12BS surface mount schottky rectifie r reverse voltage 100v forward current 12a www.goodark.com 2/4 2014.03-rev.a ratings and characteristics curves ( ta = 25 unless otherwise noted ) figure ? 2. ? typical ? reverse ? characteristics ? figure ? 1.maximum non \ repetitive ? peak ? forward ? surge ? current figure ? 3. ? typical ? junction ? capacitance notes 1) mounted on pcb with 30 * 30mm copper pad area figure ? 4. ? typical ? instantaneous ? forward ? characteristics ? 1) mounted on p . c . b ? with 30 30mm copper pad area 2) ? mounted ? on ? p.c.b ? with ? 30*30mm ? copper ? pad ? area ???????? (r ja =27 /w) 3) ? mounted ? on ? p.c.b ? with ? 30*30mm ? copper ? pad ? area ???????? (r ja =30 /w) 4) ? mounted ? on ? p.c.b ? with ? 30*30mm ? copper ? pad ? area ???????? (r ja =32 /w) 5 ) ? mounted ? on ? p.c.b ? with ? 30*30mm ? co pp er ? p ad ? area ???????? figure ? 5.forward ? current ? derating ? curve ) pp p (r ja =34 /w) 6) ? fre ? air, ? mounted ? on ? recommended ? copper ? pad ? area ? fr4 ? pcb(r ja =75 /w) 7) ? fre ? air, ? mounted ? on ? recommended ? copper ? pad ? area ? fr4 ? pcb(r ja =76 /w) www.goodark.com 2/4 2014.03-rev.a
SGC12BS surface mount schottky rectifie r reverse voltage 100v forward current 12a www.goodark.com 3/4 2014.03-rev.a package outline dimensions min max min max he 64 66 0 252 0 260 ' , 0 8 q l w p p 8 q l w l q f k he 6 . 4 6 . 6 0 . 252 0 . 260 e 5.6 5.8 0.220 0.228 d 4.1 4.3 0.161 0.169 b1 1.7 1.9 0.067 0.075 b2 0.8 1 0.031 0.039 a 1.05 1.2 0.041 0.047 c 0.3 0.4 0.012 0.016 l 0.85 1.1 0.033 0.043 l1 4.2 4.4 0.165 0.173 l2 l3 1.1 1.4 0.043 0.055 d1 3 3.3 0.118 0.130 e1 3.52 typ. 0.139 typ. 1.86 typ. 0.073 typ. soldering ?? footprint packing information packing quantities: 5000 pcs/reel 12mm tape, 13" reel tape & reel specification tape & reel specification www.goodark.com 3/4 2014.03-rev.a
SGC12BS surface mount schottky rectifie r reverse voltage 100v forward current 12a www.goodark.com 4/4 2014.03-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer?s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good - ark electronics co., ltd.or a intellectual property rights , or any other rights , belonging to suzhou good ark electronics co ., ltd . or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party ? s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials including product data diagrams charts programs and all information contained in these materials , including product data , diagrams , charts , programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage liability or other loss rising from these inaccuracies or errors please respons ibilit y f o r any d amage, li a bilit y, o r o th er l oss r i s i ng f rom th ese i naccurac i es o r errors. pl ease also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before ki fi l dii th li bilit f th if ti d dt sh g dak making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-rev.a
|
